METHOD AUTOMATIC GEODETIC TOTAL CONTROL DEFORMATION OF ENGINEERING STRUCTURES

Author:

Malik Tetiana, University of emerging technologies (28 Mashynobudivnyi Per., 03067 Kyiv, Ukraine)

Burachek Vsevolod, Chernihiv National University of Technology (95 Shevchenka Str., 14027 Chernihiv, Ukraine)

Bryk Yaroslav, University of emerging technologies (28 Mashynobudivnyi Per., 03067 Kyiv, Ukraine)

Language: ukrainian

Annotation:

This article includes method automatical continuous geodetic deformation of engineering structures based on a method of constructing the line of alignment based on the photoelectric circuit expansion marks. The result of the proposed method for monitoring deformation in engineering structures is to increase the accuracy of measurements of deformations and continuous coverage of the control measurements of the continuous cover of engineering construction, including all internal structures, as well as increasing the efficiency of control deformations.

Key words:

automatical control deformation structures, clearing line

References:

1. BorovyiVO. (ed.), BorysiukLV., BurachekVH. (2004). Avtomatyzatsiia heodezychnykh vymiriuvan [Geodesic measurements automation]. Chernihiv: Chernihivski oberehy, 368 p. (in Ukrainіan).

2. Burachek, V. G., Malik, T. N., Likhovolov, O. V. (2015). Avtomatizirovannaia sistema tochnogo geodezicheskogo kontrolia deformatcii inzhenernykh sooruzhenii [Automated system for precise geodetic deformation control of engineering structures]. Proektirovanie razvitiia regionalnoi seti zheleznykh dorog: sb. nauch. tr. – Planning development of the regional rail network: Scientific papers collection (Shvartcfeld, V. S. (eds.). Khabarovsk: Izd-vo DVGUPS, 2015. issue 3, pp. 86–98 (in Ukrainіan).

3. BurachekVH., MalikTM., BelenokVYu. (2012). Pro pokhybky vymiriuvan tsyfrovoiu kameroiu pry neuzghodzhenosti ortonormovanykh bazysiv pryladovoi i heodezychnoi system [On digital camera measurement accuracy with inconsistencies orthonormal bases of instrument and geodetic systems]. Inzhenerna heodeziia – Engineering Geodesy, no. 58, pp. 208–223 (in Ukrainian).

4. Burachek, V. G., Malik, T. N., Khomushko, D.V., Belenok V.Iu. (2013). Doslidzhennia shliakhiv pidvyshchennia tochnosti heodezychnykh system za rakhunok stvorennia novykh optyko-elektronnykh skhem vymiriuvan. Zvit pro NDR (№0113U003666) – Scientific research reports. Chernihivskyi derzhavnyi instytut ekonomiky i upravlinnia, Pryvatnyi vyshchyi navchalnyi zaklad Universytet novitnikh tekhnolohii, 172 р. (in Ukrainian).

5. Evstafev, O. V., Iashchenko, A. I. (2010). Problemy ustanovki i sokhrannosti oborudovaniia avtomatizirovannykh sistem deformatcionnogo monitoringa [Installation and safety of the automated deformation monitoring equipment issues]. Inzhiniringovyi tcentr GFK. – Engineering centre GFK. Retrieved fromhttp://www.icentre-gfk.ru/data/save_obdefmon_02_2010_z.pdf.

6. Zaitcev, A. K., Marfenko, S. V., Mikhelev, D. Sh. (1991). Geodezicheskie metody issledovaniia deformatcii sooruzhenii [Geodetic methods of deformation structures examining]. Moscow: Nedra, 272 p. (in Russian).

7. Idiatullin, D. R., Kletcin, V. I. Sistema monitoringa sostoianiia nesushchikh konstruktcii realnogo vremeni (SMIK) [Condition monitoring system supporting real-time structures (SMIC)]. Predotvrashchenie avarii zdanii i sooruzheni – The prevention of accidents inbuildings and constructions, no. FS77-35253Retrieved fromwww.pamag.ru/pressa/smik-rv. s. (in Russian).

8. Kovtun, V., Chaplinskaia, L. (2011). Sovremennyi geodezicheskii monitoring – osnova vozvedennia i bezopasnoi eksplutatatcii vysotnykh zdanii [Modern geodetic monitoring - the basis of construction and safe operation of high-rise buildings]. Geoprofi – Geospatialtechnologies. Moscow, pp. 20–22 (in Russian).

9. MazinID. (1991). Inzhenerno-geodezicheskie raboty pri rekonstruktcii promyshlennykh obektovspravochnoe posobie – Engineering and geodesic works in the reconstruction of industrial objects: a reference guide. Moscow: Nedra, 216 p. (in Russian).

10. Borovyi, V. O., Buravliev, Y. P., Burachek, V. H., Krysenko, M. V. (2009). Sposib avtomatychnoho kontroliu tekhnohennoi bezpeky mahistralnykh naftohazoprovodiv [Method for automated control of technogenic safety of main oil-gas pipelines]. Patent Ukrain No. 85229.

11. Khiller, B., Sukhov, I.V., Li ,V.T. (2015). Avtomatizirovannaia sistema deformatcionnogo monitoringa (ASDM) na Saiano-Shushenskoi GES [Automated deformation monitoring system (ASDM) at the Sayano-Shushenskaya HPP]. Gidrotekhnika – Hydraulic engineering. Saint Petersburg, no. 2, pp. 12–15 (in Russian).

12. Iambaev, Kh. K. (1986). Vysokotochnye stvornye izmereniia [Casement Precision Measurement]. Moscow: Nedra, 264 p. (in Russian).

13. Iashchenko, A. I. (2010). Ot vodianogo urovnia do vysokotochnogo inklinometra [From the water level to the high-precision inclinometer]. Geoprofi – Geospatial technologies. Moscow, no. 4, pp. 20–22 (in Russian).

14. Cranenbroeck, J. (2011). State of the Art in Structural Geodetic Monitoring Solutions for Hydro Power Plant. Proceedings of the FIG Working Week 2011 Bridging the Gap between Cultures Marrakech (Morocco, 18-22 May 2011).

Download