MODULAR THREE-DIMENSIONAL MODELING OF THE PROCESS OF REMOVAL OF ADAPTATION AND FORMATION FORMING THE CAMS WITH AN ORIENTED TOOL

УДК:621.914.1

DOI:10.25140/2411-5363-2019-2(16)-34-43

Author:

Sliednikova Olena, Chernihiv National University of Technology (95 Shevchenka Str., 14035, Chernihiv, Ukraine)

Vynnyk Volodymyr, Chernihiv National University of Technology (95 Shevchenka Str., 14035, Chernihiv, Ukraine)

Sklyar Vasyl, Chernihiv National University of Technology (95 Shevchenka Str., 14035, Chernihiv, Ukraine)

Aksonova Olga , Chernihiv National University of Technology (95 Shevchenka Str., 14035, Chernihiv, Ukraine)

Language: ukrainian

Annotation:

Urgency of the research. Providing high precision cam camshafts and textile machinery while ensuring high processing performance of these parts is an urgent task in the engineering, automotive and textile industries.

Target setting. The high accuracy and quality of machined curved surfaces of the cams will ensure the correct operation of the nodes and will increase their service life.

Actual scientific researches and issues analysis. Known methods of processing the curved surfaces of the cams of the camshafts, but in these methods, the flow along the contour is uneven,  the depth of cut is different, which reduces the accura- cy of the machined part and the processing performance.

Uninvestigated parts of general matters defining. The study of the process of rough and fair milling of the curved sur- faces of the cams of the camshafts and textile machines oriented mill for one installation, which will provide high rates of accuracy and productivity of processing.

The research objective. The development of a new method of rough and fair milling  of the curved surfaces of the cams of the camshafts and textile machines with crossed cutter axes and parts in one fastening will provide an increase in the ac- curacy and quality of the processed surfaces and processing performance.

The statement of basic materials. The presented method of milling the curvilinear surfaces of the cams of the camshafts, where the roughing and finishing work is carried out by a cutter whose height is less than the length of the cam. Milling of all cams of a camshaft is carried out in one fixing with a tool with crossed axes and parts. When machining the camshaped cam surfaces, stabilization of the contour feed and removal of the seam allowance is ensured. That provides increased accuracy and processing performance.

Conclusions. The proposed method of milling the curved surfaces of  the cams of  the camshafts and textile machines  with crossed axes of the cutter and parts. The proposed method  of  milling curvilinear surfaces  on CNC machines, where in one pass, roughing and finishing milling of all cams takes place.

Key words:

cam milling; modular three-dimensional modeling; oriented tool; camshaft; cam textile machine; shaping.

References:

  1. Shlifovalnye stanki zavod «Kharverst» [Grinding machines Plant Harverst]. Kharkiv. Retrieved from www.harverst.com.ua.
  2. Shlifovanie raspredelitelnykh valov krugami iz kubicheskogo nitrida bora [Grinding camshafts with cubic boron nitride circles] (2006). Prospekt firmy «Junker maschinen» na stanki «JUCAM 1000», «JUCAM 3000», «JUCAM 5000», «JUCAM 6000» – Prospectus of the company «Junker  maschinen»  on machine tools «JUCAM 1000», «JUCAM 3000», «JUCAM 5000», «JUCAM 6000». Erwin Junker. Maschinen fabric Gmbh, Junkerstraβe 2. 77787 Nordrash. Germany [in Russian].
  3. CBN crankshaft grinding (2012). Prospect firm «Junker maschinen» on machines «JUCRANK 1000», «JUCRANK 3000», «JUCRANK 5000», «JUCRANK 6S/L/XL». Erwin Junker. Maschinen fabric Gmbh, Junkerstraβe 2. 77787 Nordrash. Germany [in Germany].
  4. Kalchenko, V. I., Kalchenko, D. V. (2014). Modular 3D modeling of tools, process of pulling down and shaping when grinding with crossed axles of crankshaft and a circle [Modular 3D modeling of tools, process of pulling down and shaping when grinding with crossed axles of crankshaft and a circle]. Rezanie i instrument v tekhnologycheskikh sistemakh – Cutting & tool in technological system, 84, 107–114 [in Ukrainian].
  5. Kalchenko, V. I., Kalchenko, D. V., Sliednikova, O. S (2015). Modulne 3D-modeliuvannia instrumentiv, protsesu zniattia prypusku ta formoutvorennia pry shlifuvanni zi skhreshchenymy osiamy rozpodilchoho vala i kruha [Modular 3D-modeling tools, process and removal allowance forming in grinding with crossed axes and circular distribution shaft]. Rezanie i instrument v tekhnologycheskikh sistemakh – Cutting & tool in technological system, 85, 98–106 [in Ukrainian].
  6. Kalchenko, V. V., Sira N. M. & Kalchenko, D. V. (2018). Doslidzhennia protsesu frezeruvannia tsylindrychnykh poverkhon zi skhreshchenymy osiamy instrumenta ta vala [Investigation of the millling cylindrical surfaces process with tool and shaft crossed axes] Tekhnichni nauky ta tekhnolohii – Technical sciences and technologies, 4 (14), 18–17 [in Ukrainian].
  7. Klimenko, S. A. (2011). Razrabotka PSTM na osnove KNB dlya osnascheniya vyisokoeffektivnyih; rezhuschih instrumentov [Development of PSTM based on CBN for equipping highperformance cutting tools]. Rezanie i instrument v tekhnologicheskikh sistemakh – Cutting and tool in technological systems, 79, 93–101 [in Russian].
  8. Klimenko, S. A., Kopeіkina, M. Iu., Klimenko, S. A., Manokhin, A. S. (2016). Kontseptsiya povyisheniya rabotosposobnosti rezhuschih instrumentov iz polikristallicheskih kompozitov na osnove kubicheskogo nitrida bora [The concept of improving the performance of cutting tools from polycrystalline composites based on cubic boron nitride]. Informatsiyni tehnologii v osviti, nautsi ta virobnitstvi – Information technology in education, science and production, 2 (13), 108–114 [in Russian].
  9. Sliednikova, O. S, Vynnyk, V. O. & Sklyar V. M. (2019). Modulne 3D-modeliuvannia instrumentiv, protsesu zniattia prypusku ta formoutvorennia pry frezeruvanni kulachkiv zi skhreshchenymy osiamy instrumenta ta detali [Modular 3D modeling of tools, process of adaptation removal and forming at milling the cams with crossing tools and details] Tekhnichni nauky ta tekhnolohii – Technical sciences and technologies, 1 (15), 53–62 [in Ukrainian].
  10. Kalchenko, V. I., Kalchenko, V. V. & Sira N. M. (2016). Modulne 3D-modeliuvannia instrumentiv, procesiv zniattia prypusku ta formoutvorennia pry shlifuvanni zi shreshchenymy osiamy tsylindrychnoho ta stupinchastoho vala i elborovoho kruha [Modular 3D-modeling tools, processes of removal allowance and shaping in grinding with crossed axes stepped cylindrical shaft and CBN wheel]. Rezanie i instrument v tekhnologicheskikh sistemakh – Cutting and tool in technological systems, 86, 36–48 [in Ukrainian].
  11. Kalchenko, V. I., Kalchenko, D. V. (2013). Modulne 3D-modeliuvannia instrumentiv, protsesu zniattia prypusku ta formoutvorennia pry shlifuvanni zi skhreshchenymy osiamy stupinchastoho vala i kruha [Modular 3D modeling of tools, process of pull-down and shaping when grinding with crossed axes of a stepshaft and a circle]. Visnyk Chernihivskoho derzhavnoho tekhnolohichnoho universytetu. Seriia «Tekhnichni nauky» – Visnyk of Chernihiv State Technological University. Series «Technical sciences», 3 (67), 68–77 [in Ukrainian]. 
  12. Kalchenko, V. I., Pogiba, N. N. & Kalchenko, D. V. (2012). Opredelenie sostavliaiushchikh sily rezaniia pri glubinnom shlifovanii poverkhnostei vrashcheniia orientirovannym elborovym krugom [Determining cutting forces components in deep grinding of revolution surfaces oriented el’bor wheel]. Sverkhtverdye materialy – Journal of Superhard Materials, 2 (196), 58–73 [in Russian].
  1. Kalchenko, V. V., Yeroshenko, A. M. & Boyko, S. V. (2017). Determination  of  cutting forces in grinding  with crossed axes  of  tool and  workpiece.  Acta  Mechanica  et  Automatica,  11  (1 (39)), 58-63 [in English].
  2. Kalchenko, V. I., Kolohoida, A. V., Kuzhelnyi, Ya. V. & Morochko V. V. (2018). Odnoprokhidne dovodochne shlifuvannia zi skhreshchenymy osiamy kruha ta tsylindrychnoi detali [Sin- glepass finishing grinding with crossed axes tool and cylindrical part]. Tekhnichni nauky ta tekhnolohii – Technical sciences and technologies, 4 (14), 9–17 [in Ukrainain].
  3. Grabchenko, A. I., Kalchenko, V. I. & Kalchenko, V. V. (2009). Shlifovanie so skreshhivayushhimisya osyami instrumenta i detail [Grinding with crossed axes of tool and workpiece]. Cherni- gov: ChDTU [in Russian].
  4. Reshetov, D. N. & Portman, V. T. (1996). Tochnost metallorezhushchikh stankov [Precision of machine tools]. Moscow: Mashinostroenie [in Russian].
  5. Rodin, P. R. (1977). Osnovy formoobrazovaniya poverxnostej rezaniem [Fundamentals of forming surfaces with cutting]. Kiev: Vyshha shkola [in Russian].
  6. Kalchenko, V. I., Pogiba, N. N. & Kalchenko, D. V. (2011). Povyshenie proizvoditelnosti i tochnosti shlifovaniia so skreshchivaiushhimisia osiami elborovogo kruga i stupenchatogo valika [Increased productivity and precision of grinding with crossed axes CBN wheel and steped shaft]. Rezanie i instrument v tekhnologicheskikh sistemakh  – Cutting and tool in technological systems,    80, 131–140 [in Ukrainian].

Download